| If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
|
06-03-2005, 02:19 PM
|
#1
|
|
|
Stitch and Glue Resin--Bondo ok?
Hey all, I came accross an epoxy resin for "fiberglass repair" made by
bondo that is sold in stores around me, including walmart. It uses I
believe 7 drops of hardner (included) for one oz of resin.
Has anyone here tried useing such a product to make a stitch and glue
boat? Aside from the dosage problems with such a small ratio, can
anyone think of any other problems that would come up?
Thanks in advance.
dave
email: dallyn_spam at yahoo dot com
please respond in this NG so others
can share your wisdom as well!
|
|
|
|
|
06-03-2005, 05:03 PM
|
#2
|
|
|
Re: Stitch and Glue Resin--Bondo ok?
Epoxy resin systems resin:hardener ratios generally range from 5: 1 to 1:1 .
If the amount of hardener needed is 7 drops per oz., it's polyester resin,
not epoxy. Don't use it.
"Dave Allyn" <dallyn_spam@yahoo.com> wrote in message
news:htpk21loi2ba0jbrgjejbt4ok2rcqmo7ni@4ax.com...
> Hey all, I came accross an epoxy resin for "fiberglass repair" made by
> bondo that is sold in stores around me, including walmart. It uses I
> believe 7 drops of hardner (included) for one oz of resin.
>
> Has anyone here tried useing such a product to make a stitch and glue
> boat? Aside from the dosage problems with such a small ratio, can
> anyone think of any other problems that would come up?
>
> Thanks in advance.
>
> dave
>
>
> email: dallyn_spam at yahoo dot com
> please respond in this NG so others
> can share your wisdom as well!
|
|
|
|
|
07-03-2005, 03:16 AM
|
#3
|
|
|
Re: Stitch and Glue Resin--Bondo ok?
Dave Allyn (dallyn_spam@yahoo.com) writes:
> Hey all, I came accross an epoxy resin for "fiberglass repair" made by
> bondo that is sold in stores around me, including walmart. It uses I
> believe 7 drops of hardner (included) for one oz of resin.
As mentioned, that does not sound like epoxy. Bondo usually refers to
polyester resin, often bought in auto stores for filling rust holes in car
bodies, with or without fibreglass cloth reinforcement. When I use it I
put 2 drops of hardner per teaspoon of resin. I'm currently using
polyester mixed with sanding dust to fill gaps in a small boat, and wiped
on the exposed edges of plywood (twice) to seal the end grain. It has the
advantage of soaking into the wood in its pure form, and then curing when
wiped with a second coat mixed with hardener.
The problem for stitch and glue is polyester is not a glue (adhesive). It
sticks to many surfaces just like paint, but doesn't have sufficient
bonding strength to hold parts together under stress.
If you want to save money over buying less-than-bulk quantities of epoxy
for a small boat you might look at the info on stitch-and-glue
construction with polyurethane construction adhesive (aka "liquid nails")
on David Beede's website, www.simplicityboats.com. I use this adhesive
with and without screws for chine batten construction on small boats I
build for my own use. I've sucessfully glued skids (dual keels) to the
bottom of one plywood boat with it taking out the screws after it
cured, and have just put a pair on the current boat the same way.
>
> Has anyone here tried useing such a product to make a stitch and glue
> boat? Aside from the dosage problems with such a small ratio, can
> anyone think of any other problems that would come up?
>
> Thanks in advance.
>
> dave
>
>
> email: dallyn_spam at yahoo dot com
> please respond in this NG so others
> can share your wisdom as well!
--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-FreeNet email must have "notspam" in subject or it's returned
|
|
|
|
|
07-03-2005, 05:24 AM
|
#4
|
|
|
Re: Stitch and Glue Resin--Bondo ok?
Okay. Thanks. at $25/gallon I thought it was worth at least
asking..
Thanks also for the link. I just spent about an hour and a half
looking though the site. Lots of interesting stuff. I bought an
extra sheet of ply already (I case I mess up a cut) and that might
become something after all!
thanks again!
dave
On 6 Mar 2005 15:16:30 GMT, ag384@FreeNet.Carleton.CA (William R.
Watt) wrote:
>
>Dave Allyn (dallyn_spam@yahoo.com) writes:
>> Hey all, I came accross an epoxy resin for "fiberglass repair" made by
>> bondo that is sold in stores around me, including walmart. It uses I
>> believe 7 drops of hardner (included) for one oz of resin.
>
>As mentioned, that does not sound like epoxy. Bondo usually refers to
>polyester resin, often bought in auto stores for filling rust holes in car
>bodies, with or without fibreglass cloth reinforcement. When I use it I
>put 2 drops of hardner per teaspoon of resin. I'm currently using
>polyester mixed with sanding dust to fill gaps in a small boat, and wiped
>on the exposed edges of plywood (twice) to seal the end grain. It has the
>advantage of soaking into the wood in its pure form, and then curing when
>wiped with a second coat mixed with hardener.
>
>The problem for stitch and glue is polyester is not a glue (adhesive). It
>sticks to many surfaces just like paint, but doesn't have sufficient
>bonding strength to hold parts together under stress.
>
>If you want to save money over buying less-than-bulk quantities of epoxy
>for a small boat you might look at the info on stitch-and-glue
>construction with polyurethane construction adhesive (aka "liquid nails")
>on David Beede's website, www.simplicityboats.com. I use this adhesive
>with and without screws for chine batten construction on small boats I
>build for my own use. I've sucessfully glued skids (dual keels) to the
>bottom of one plywood boat with it taking out the screws after it
>cured, and have just put a pair on the current boat the same way.
>
>>
>> Has anyone here tried useing such a product to make a stitch and glue
>> boat? Aside from the dosage problems with such a small ratio, can
>> anyone think of any other problems that would come up?
>>
>> Thanks in advance.
>>
>> dave
>>
>>
>> email: dallyn_spam at yahoo dot com
>> please respond in this NG so others
>> can share your wisdom as well!
email: dallyn_spam at yahoo dot com
please respond in this NG so others
can share your wisdom as well!
|
|
|
|
|
07-03-2005, 06:19 AM
|
#5
|
|
|
Re: Stitch and Glue Resin--Bondo ok?
It is a polyester product and is not a good choice with stitch and glue
construction. Polyester resin does not offer the adhesion recquired for
proper stitch and glue construction.
---Joel---
--
boatbuilder.org
|
|
|
|
|
07-03-2005, 08:55 AM
|
#6
|
|
|
Re: Stitch and Glue Resin--Bondo ok?
"'Bondo" is now a brand, not a single product.
"Dave Allyn" <dallyn_spam@yahoo.com> wrote in message
news:i1fm21dafkhjokd7sdpnb7ttj6kj6ea7oq@4ax.com...
> Okay. Thanks. at $25/gallon I thought it was worth at least
> asking..
>
>
>
> Thanks also for the link. I just spent about an hour and a half
> looking though the site. Lots of interesting stuff. I bought an
> extra sheet of ply already (I case I mess up a cut) and that might
> become something after all!
>
> thanks again!
>
> dave
>
> On 6 Mar 2005 15:16:30 GMT, ag384@FreeNet.Carleton.CA (William R.
> Watt) wrote:
>
> >
> >Dave Allyn (dallyn_spam@yahoo.com) writes:
> >> Hey all, I came accross an epoxy resin for "fiberglass repair" made by
> >> bondo that is sold in stores around me, including walmart. It uses I
> >> believe 7 drops of hardner (included) for one oz of resin.
> >
> >As mentioned, that does not sound like epoxy. Bondo usually refers to
> >polyester resin, often bought in auto stores for filling rust holes in
car
> >bodies, with or without fibreglass cloth reinforcement. When I use it I
> >put 2 drops of hardner per teaspoon of resin. I'm currently using
> >polyester mixed with sanding dust to fill gaps in a small boat, and wiped
> >on the exposed edges of plywood (twice) to seal the end grain. It has the
> >advantage of soaking into the wood in its pure form, and then curing when
> >wiped with a second coat mixed with hardener.
> >
> >The problem for stitch and glue is polyester is not a glue (adhesive). It
> >sticks to many surfaces just like paint, but doesn't have sufficient
> >bonding strength to hold parts together under stress.
> >
> >If you want to save money over buying less-than-bulk quantities of epoxy
> >for a small boat you might look at the info on stitch-and-glue
> >construction with polyurethane construction adhesive (aka "liquid nails")
> >on David Beede's website, www.simplicityboats.com. I use this adhesive
> >with and without screws for chine batten construction on small boats I
> >build for my own use. I've sucessfully glued skids (dual keels) to the
> >bottom of one plywood boat with it taking out the screws after it
> >cured, and have just put a pair on the current boat the same way.
> >
> >>
> >> Has anyone here tried useing such a product to make a stitch and glue
> >> boat? Aside from the dosage problems with such a small ratio, can
> >> anyone think of any other problems that would come up?
> >>
> >> Thanks in advance.
> >>
> >> dave
> >>
> >>
> >> email: dallyn_spam at yahoo dot com
> >> please respond in this NG so others
> >> can share your wisdom as well!
>
>
>
> email: dallyn_spam at yahoo dot com
> please respond in this NG so others
> can share your wisdom as well!
|
|
|
|
|
07-03-2005, 09:33 PM
|
#7
|
|
|
Re: Stitch and Glue Resin--Bondo ok?
Dave Allyn wrote:
> Hey all, I came accross an epoxy resin for "fiberglass repair" made by
> bondo that is sold in stores around me, including walmart. It uses I
> believe 7 drops of hardner (included) for one oz of resin.
>
> Has anyone here tried useing such a product to make a stitch and glue
> boat? Aside from the dosage problems with such a small ratio, can
> anyone think of any other problems that would come up?
>
> Thanks in advance.
>
> dave
>
> email: dallyn_spam at yahoo dot com
> please respond in this NG so others
> can share your wisdom as well!
If it is using 'drops' of 'hardener' it is not an epoxy but a polyester
resin.
Polyester resin on wood tends to peel off after a few years.
paul oman
progressive epoxy polymers
--
"Living on Earth is expensive, but it does include
a free trip around the Sun every year."
|
|
|
|
|
27-03-2005, 06:10 AM
|
#8
|
|
|
Re: Stitch and Glue Resin--Bondo ok?
On Mon, 07 Mar 2005 09:33:05 GMT, Paul Oman <pauloman@pauloman.com>
wrote:
>If it is using 'drops' of 'hardener' it is not an epoxy but a polyester
>resin.
>Polyester resin on wood tends to peel off after a few years.
Hi,
AFIAK bonding agents (eg. in the form of a one part moisture curing
polyurethane) are available that help stop this, but probably not
worth it on a small boat.
cheers,
Pete.
|
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +11. The time now is 07:28 AM.
Powered by: vBulletin Version 3.0.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
The Travel Forum
|
|
|
|
